Welcome to the official website of Huizhou FuyuanHongtai Precision Technology Co., Ltd!
Professional drill, Router endmill, Router of carbide cutting tools manufacturer
6000 square meters workshop - Advanced production equipment - Rich production R&D management team
Where are you now:Home / Service / Common problem

Service supportService

2020-09-19
Possible reason 1. The drilling temperature is too high 2. The drill bit is too worn or the cutting edge is chipped 3. Inappropriate residue removal process Solution 1. Increase the feed speed and reduce the cutting speed 2. Check th
2020-09-19
Possible reason 1. The drill bit is too worn or the cutting edge is chipped 2. The feed/retract speed is too high 3. The material of the aluminum cover/wood backing board is too soft 4. Insufficient pressure on the pressure foot Solutio
2020-09-19
Possible reason 1. The feed speed/retract speed is too high or too low 2. Cutting parameter error 3. The drill bit is too worn or the cutting edge is chipped 4. Excessive drilling temperature Solution 1. Improve tool speed/retract sp
Contact Us

Huizhou Fuyuan Hongtai Precision Technology Co., Ltd.

Phone: 0752-3759188

Fax: 0752-3755183

E-mail: admin@szfyht.com

Website: www.szfyht.com

Address: Shitangpu Industrial Zone, Jiji Village, Shatian Town, Huiyang District, Huizhou City


Service hotline
0752-3759188
© 2020 Huizhou Fuyuan Hongtai Precision Technology Co., Ltd. All rights reserved 粤ICP备14001694号-由万创科技提供技术支持